📞 (888) 888-8888

Home › Guides › High water bill in Tulsa

High water bill in Tulsa: is it a leak, an estimate, or your sewer cap?

From City of Tulsa billing rules: spot an estimated bill, test your meter for a leak, and request a Courtesy Leak Credit if a hidden leak ran up your usage.

Published 2026-11-15 · Last reviewed 2026-11-15 · Answers the question: “Why is my Tulsa water bill so high, and can I get money back if it was a leak?”

Quick answer

  1. Check if the bill was estimated. On page 2 of your City of Tulsa bill, look at Read Type under Charge Details. The City says “EST” or “MAN” means the usage was estimated, and it trues up on the next actual read.
  2. Test for a leak. Turn off all water and look at your meter's leak indicator (a leaky-faucet icon on digital meters, a spinning red triangle on older dial meters). Moving with everything off means water is escaping somewhere.
  3. Found a hidden leak? Get it repaired, keep the plumber's receipt, and request the City's Courtesy Leak Credit in writing. It covers part, not all, of the extra usage, and only for hidden private-line leaks, not toilets or faucets.

Need a plumber to find or fix the leak? Call (888) 888-8888. Think the bill is wrong? Call the City at 311.

Step 1: Was the bill estimated?

The City of Tulsa's Utility Billing FAQ lists three things to check before anything else:

How Tulsa estimates. Per the City, bills estimated from November through March use your daily average for the previous 3 years; bills estimated April through October use the previous 12 months. On the next actual read the City trues up: a high estimate becomes a credit, a low estimate becomes a higher bill. A high bill right after a run of low estimates is often the true-up, not a leak.

New meters. Tulsa's True Reads program is replacing aging meters with automated ones. In an Oct. 6, 2026 release, the City said about 9,200 recently installed Neptune ultrasonic meters will be replaced due to a manufacturer defect, at no cost to customers, and that accounts with defective meters were already placed on estimated billing based on the property's historical usage. If your bill says EST and you can read your own meter, compare the reading; you can call 311 if the numbers don't line up.

Step 2: Do the meter leak test

  1. Turn off all water: faucets, showers, dishwasher, washer, ice maker, irrigation, pool fill.
  2. Find the meter. The City says it's probably in your front yard near the street, or in the back or side yard, under a cast-iron or black plastic lid marked “water meter.”
  3. Read the leak indicator. Automated (AMR) meter with a digital display: look for the leaky-faucet icon at the top of the readout. Older direct-read meter: a small red triangle that spins when water flows. You can also note the reading and check again after 15 to 30 minutes of no use.
  4. Narrow it down. If the meter shows flow, close your home's main shut-off valve. Meter stops: the leak is inside the house. Meter keeps moving: the leak is likely in the yard line between the meter and the house.

Reading the numbers: the City says an analog register shows usage in thousands of gallons and a digital display shows gallons. Sources: City Life, May 2024, Utility Billing FAQ.

The usual suspects, cheapest first

WhereHow to checkLeak credit?
Toilet flapper or fill valveA few drops of food coloring in the tank; color in the bowl without flushing means a leak (City of Tulsa tip)No (fixtures excluded)
Dripping faucet or showerheadLook and listen; EPA says one drip per second wastes more than 3,000 gallons a yearNo
Outdoor spigot or yard hydrantCheck for wet ground or ice; disconnect hoses before freezesNo
Irrigation systemWalk zones for soggy spots; EPA says a leak 1/32 inch across can waste about 6,300 gallons a monthOnly if the leak is underground; timer and above-ground head problems excluded
Water heater (relief valve, drain valve, tank)Water on the floor or a discharge pipe that dripsNo (equipment excluded)
Yard line, meter to houseMeter keeps moving with the house main shut; soggy or extra-green strip in the yardPossibly, if hidden and promptly repaired
Slab or in-wall leakWarm floor spots, sound of running water, damp wallsPossibly, if hidden and promptly repaired

For scale: the City's Household Water Usage page cites an industry estimate of about 3,000 gallons per person per month, or 12,000 for a family of four, and EPA WaterSense says a family of four going over 12,000 gallons a month could have serious leaks. EPA also says the average household's leaks waste more than 9,300 gallons a year, and fixing easily corrected leaks can save about 10 percent on water bills.

Step 3: The City of Tulsa Courtesy Leak Credit

From the City's Water Leak Credit Program page:

What can qualify

What doesn't qualify

How much it's worth

For private-line leaks the City's formula is (highest usage month − baseline usage) × 50% × billing rate, limited to the two highest qualifying months. Your baseline is generally the higher of your sewer cap or the average of the two months before the leak. Residential customers whose sewer is limited by the cap get credit on water usage only. The City's residential water rate is $4.80 per 1,000 gallons.

Worked example (hypothetical numbers): baseline 5,000 gallons, leak month 20,000 gallons. Excess is 15,000 gallons. Credit = 15 × 50% × $4.80 = $36 for that month. In other words, the credit softens the bill; it doesn't erase it. The faster a hidden leak is found and fixed, the less you pay.

How to request it

  1. Write a request with your account number or service address.
  2. Attach documentation: a plumber's receipt for the repair or inspection, or a dated statement describing the issue with receipts for supplies and photos of the leak or repair.
  3. Send it by email to UtilitiesCS@cityoftulsa.org with the subject “Courtesy Leak Credit Request”, by fax to (918) 596-3170, by mail to Utility Billing Department, 175 E 2nd Street, Suite 1580, Tulsa OK 74103, or in person at City Hall, 2nd floor.
  4. Keep paying. The City reviews the next bills to confirm usage is back to normal, which can take up to 60 days, and you're responsible for the balance meanwhile. Call 311 to spread the balance over 30, 60 or 90 days; the City says arrangements have no fee.

Winter leaks and your sewer cap

This catches Tulsans by surprise. Per the City's Residential Sewer Charges Explained page, single-family sewer charges are based on a cap: the average of your billed water use in December, January and February over the previous five years (15 months), recalculated every May. Each month you're billed sewer on the lower of your actual water use or the cap, at $11 per 1,000 gallons.

Who to call in Tulsa

SituationWho
Bill looks wrong, estimated, or you want an actual read or cap reviewCity of Tulsa Customer Care: 311 (email Tulsa311@cityoftulsa.org)
Leak at the meter can or in the streetCity of Tulsa: 311; major leak after hours (918) 596-9488
Meter moves with everything off; leak in the house, yard line or slabA plumber: (888) 888-8888. Keep the receipt for your credit request.
Leak credit requestUtilitiesCS@cityoftulsa.org, subject “Courtesy Leak Credit Request”
Need time to pay311 payment arrangement (30, 60 or 90 days)

Broken Arrow, Owasso, Jenks, Bixby, Sand Springs, Sapulpa and Glenpool bill water separately; the City of Tulsa leak credit and sewer cap rules above apply to City of Tulsa utility customers. Ask your own city about its billing and leak policies.

Hiring a plumber for a hidden leak

Ask how they'll locate the leak before opening walls, floors or the yard (isolation, pressure testing, acoustic and thermal tools), get repair options in writing, and ask for an itemized receipt that names the leak location and repair date, which is the documentation the City asks for. Verify the contractor's Oklahoma license on the CIB Are They Licensed? page. Related: leak detection in Tulsa · toilet & faucet repair · water heater repair · plumber in Tulsa · frozen or burst pipes

Frequently asked questions

Why is my Tulsa water bill so high all of a sudden?

The three most common reasons are an estimated meter read (the City's billing FAQ says an "EST" or "MAN" read type on page 2 means the bill was estimated), a leak on your side of the meter such as a running toilet or a hidden yard or slab line, and seasonal use like lawn watering or filling a pool. Check the read type first, then do a meter leak test with all water turned off.

How do I check my Tulsa water meter for a leak?

Turn off all water use in and around the house, then look at the meter's leak indicator. The City says an automated (AMR) meter shows a leaky-faucet icon at the top of the digital readout, and an older direct-read meter has a small red triangle that spins when water is flowing. If it shows flow with everything off, you likely have a leak.

Does the City of Tulsa give credit for a water leak?

The City has a Courtesy Leak Credit for qualifying events. A private-line leak qualifies only if it was hidden (generally underground or inside a wall), was repaired promptly, and pushed usage to at least 200 percent of your normal baseline. For private-line leaks the credit is 50 percent of the excess usage at the billing rate, for up to the two highest months. Toilets, faucets, outdoor spigots, water heaters and above-ground irrigation problems don't qualify.

How do I request a leak credit from the City of Tulsa?

In writing, with your account number or address, by email to UtilitiesCS@cityoftulsa.org with the subject line "Courtesy Leak Credit Request", by fax to (918) 596-3170, by mail to Utility Billing, 175 E 2nd Street, Suite 1580, Tulsa OK 74103, or in person at City Hall on the 2nd floor. Include a plumber's receipt for the repair or inspection, or a dated statement with supply receipts and photos.

Do I have to pay the high bill while the leak credit is reviewed?

Yes. The City says you're responsible for the balance during the review, which can take up to 60 days, and service can be cut off if it isn't paid by the normal cut-off date. You can call 311 to set up a payment arrangement over 30, 60 or 90 days; the City says there's no fee to make an arrangement.

Can a leak raise my Tulsa sewer charge?

For single-family homes, the sewer volume billed is the lower of that month's water use or your sewer cap, and the cap is recalculated each May from your December, January and February usage over the past five years. A leak outside those months can't push your sewer volume above the cap. A large leak during December to February could affect the next cap; the City says you can call 311 to request a cap review with the leak and repair dates.

Who fixes a leak at the water meter in Tulsa?

The City maintains the service line from the water main to the meter and the meter can itself; call 311, or the after-hours water emergency line at (918) 596-9488 for a major leak. The private line from the meter to your house is yours, so a leak there needs a plumber.

Get help from a local Tulsa-area plumber

Call (888) 888-8888 or send the short form and a local plumber will follow up.

By submitting you agree to be contacted about your request by phone or text. Tulsa Plumber Connect is a free referral service that connects homeowners with independent local plumbing contractors; we are not a plumbing contractor. See how it works and our privacy policy.

Sources

  1. City of Tulsa: Water Leak Credit Program
  2. City of Tulsa: Utility Billing FAQs
  3. City of Tulsa: Residential Sewer Charges Explained
  4. City of Tulsa: Utility Rates
  5. City of Tulsa: Household Water Usage
  6. City of Tulsa press release, Oct. 6, 2026: defective water meters to be replaced
  7. City of Tulsa City Life, May 2024: Simple ways to check for leaks (PDF)
  8. U.S. EPA WaterSense: Fix a Leak Week
  9. KJRH, Aug. 8, 2024: Did leaking meter cause high water bill?

All figures were checked against the sources above on 2026-11-15. City programs, rates and rules can change; confirm with City of Tulsa Customer Care (311) before relying on them. General information, not legal, billing or insurance advice. Tulsa Plumber Connect is a free referral service, not the City of Tulsa and not a plumbing contractor.

📞 Tap to call (888) 888-8888